How to Use the Mira Basal Body Thermometer? (Including Choosing the Testing Mode and Celsius/Fahrenheit)Updated 6 months ago

1. Turn on the thermometer by pressing the ON/OFF button.

2. Open the Mira app to ensure it is connected.

3. Place the probe tip under your tongue as near to your heat pockets as possible.

4. Close your mouth and leave the thermometer in place for at least 1 minute.

5. Once the measurement is complete, your data will be automatically displayed on the screen and synced with the app.

Tips:

For improved accuracy, we suggest you close your mouth for at least 2 minutes before taking a measurement.

Avoid eating or drinking anything prior to testing.

We highly recommend oral testing for the most accurate results.

There are three testing modes: Oral, Armpit, and Rectal. To switch between or select your preferred mode, please follow these instructions:

a. Ensure the thermometer is off.

b. Press the SET button. The buzzer will beep and you will see the icon.

c. Press the SET button again for 2 seconds or less to alternate between measurement modes.

d. Wait for 2 seconds on your preferred setting to make the selection.

e. Once selected, Mira's Basal Thermometer is ready to use.

You can also choose between Celsius and Fahrenheit as your measurement unit. To switch between these settings or select your preference, please follow these instructions:

a. Ensure the thermometer is off.

b. Press and hold the SET button for 5 seconds or until the buzzer beeps.

c. Press the SET button again to toggle between Celsius and Fahrenheit.

d. Wait for 2 seconds on your preferred unit to make the selection.

After this, it will automatically go to the measuring screen.